Attractive, durable and maintenance free stone veneers are a great way to increase the value of any property. Having maintained its popularity over forty years, dry-stack stone siding has become a popular choice for many homeowners these days.

Stone veneer panels are alike real stones in all respects which makes it difficult for the homeowners to distinguish between the former and the latter. Faux dry stack stones or stone veneer panels are economical, light in weight and easy to install. Entrance ways, foundations, and fireplaces are most popular areas of stone veneer panel installation.

Installation of stone veneer panels is so easy that an individual with basic carpentry and masonry skills can effortlessly create the dramatic look of stone siding.

Here are some tips that will help you in installing stone veneer panels like a pro.. have a look at them.

  1. 1.     Appropriate Installation Technique:

The right mechanism for installing stone veneers is highly essential. Initially, start form the most affordable or the lowest part of the framework, install the panels beginning from left to right and finish the initial installation before initializing a new one.

You can also start working from installing the panels from bottom to upwards. Smartly apply short and long stones alternatively. Doing so ensures a staggering pattern of the stone panels.

  1. 2.     Nailing the Installation Holes:

Polymer films inside the installation holes allow the accurate centering of the nail, permitting the material to undergo necessary expansion and contraction. Each of completed veneer panels should be nailed properly through the center holes with at least three nails between the nailing channels at maximum intervals of 16” with one nail in each lateral hole.

In case the stone veneer panels are being installed with the help of furring, then there should be a furring strip behind the nails. Non-corrosive nails and screws that are able to penetrate 1.91 cm should be used.

  1. 3.     Avoid Hammering the Nails in Completely:

Leaving a gap of 0.16 cm prevents the hammer to drive in the nails too far in the stoppers and provides the required gap for expansion and contraction of the rock panels.

 

 

  1. 4.     Joining the Pieces Precisely:

To make the stone veneer panels look real ones, it is significant to fit them together in a precise and correct manner.  Joining the veneer panels adequately provides a smooth finish and professional touch up.

  1. 5.     Leaving Spaces between Inside Wall Surface and Trim:

A minimal amount of space of 0.64 cm should be left between the stone siding and inside wall of  trim.

  1. 6.     Conceal the Cut Edges:

Sometimes there is a need to cut the stones while installing stone veneer panels which lead to exposed edges. In spite of cutting the panels perpendicularly, give the panels a back cut. Furthermore, you can use small stone panels instead of large pieces to avoid cut edges. Also, rounding the cut edges makes them look natural and actively conceals them.

 

Aside, it is equally important to cautiously review the instruction guide for detailed information on stone veneer panel installation. Other techniques of preparation of installation surface, laying out a thin layer of veneer panels before beginning the installation and dampening the surface carry their relevance for professional installation of stone veneer panels.

About The Author

Leave a Reply

Your email address will not be published.